Características mecânicas e ópticas de resinas bulk-fill: revisão de literatura

  • Cristina Balensiefer Vicenzi Universidade de Passo Fundo
  • Paula Benetti

Resumo

Objetivo: realizar uma análise descritiva das características mecânicas e ópticas das resinas bulk-fill com base em dados da literatura. Revisão da literatura: para a realização do estudo, foram utilizados artigos extraídos das bases de dados PubMed, SciELO e Lilacs. As palavras-chave utilizadas para busca foram: resina bulk-fill, resina composta, polimerização, grau de conversão, caracterização, dureza, rugosidade, resistência à flexão, translucidez, propriedades ópticas. Os compostos bulk-fill são basicamente formados por matriz orgânica e partículas de alumínio, silício e bário, medindo de0,1 μm a 1 μm. Tratam-se de resinas translúcidas que podem ser polimerizadas adequadamente em camadas espessas, possuem propriedades mecânicas aceitáveis, porém inferiores às resinas nano e micro-híbridas, e têm baixo grau de contração volumétrica e menor tensão decontração do que as resinas compostas convencionais. Considerações finais: as resinas bulk-fill são indicadas para restauração de cavidades com fator de contração cavitário desfavorável. A cobertura dessas resinas com2 mm de resina composta convencional em área oclusal é recomendável. Palavras-chave: Propriedades mecânicas. Propriedade sópticas. Resina.

Downloads

Não há dados estatísticos.

Referências

Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater 2005; 21(10):962-70.

Fráter M, Forster A, Keresztúri M, Braunitzer G, Nagy K. In vitro fracture resistance of molar teeth restored with a short fiber-reinforced composite material. J Dent 2014; 42:1143-50.

Ferracane JL, Greener EH. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 1986; 20(1):121-31.

Anusavice KJ. Phillips materiais dentários. 11. ed. Rio de Janeiro: Elsevier; 2005.

Jang JH, Park SH, Hwang IN. Polymerization Shrinkage and Depth of cure of Bulk-Fill Resin Composites and Highly Filled Flowable Resin. Oper Dent 2014; 39(6).

Orlowski M, Tarczydlo B, Chalas R. Evaluation of marginal integrity of four bulk-fill dental composite materials: in vitro study. Sci World J 2015; 2015.

Tarle TA, Marovic D, Andermatt L, Ristic M, Taubock T. Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin composites. Clin Oral Investig 2015; 19:831-40.

Ilie N, Hickel R. Investigations on a methacrylate-based flowable composite based on the SDR technology. Dent Mater 2011; 27(4):348-55.

Bucuta S, Ilie N. Light transmittance and micro-mechanical properties of bulk-fill vs. conventional resin based composites. Clin Oral Investig 2014; 18(8)1991-2000.

Fronza BM, Ayres APA, Pacheco RR, Rueggeberg FA, Dias CTS, Giannini M. Characterization of inorganic filler contente, mechanical properties, and light transmission of bulk-fill resin composites. Oper Dent 2017; 42(4):445-55.

Poggio C, Chiesa M, Scribante A, Mekler J, Colombo M. Microleakage in Class II composite restorations with margins below the CEJ: in vitro evaluation of diferente restorative techniques. Med Oral Patol Cir Bucal 2013; 18(5):793-8.

Tantbirojn D, Pfeifer CS, Braga RR, Versluis A. Do low-shrink composites reduces polymerization shrinkage effects. J Dent Res 2011; 90:569-601.

Hofmann N, Hunecke A. Influence of curing methods and matrix type on the marginal seal of class II resin-based composite restorations in vitro. Oper Dent 2006; 31:97-105.

Karaman E, Ozgunaltay G. Polymerization shrinkage of different types of composite resins and microleakage with and without liner in class II cavities. Oper Dent 2014; 39:325-31.

Leprince JG, Palin WM, Vanacker J, Sabbagh J, Devaux J, Leloup G. Physico-mechanical characteristics of commercially available bulk- fill composites. J Dent 2014; 42(8):993-1000.

Tsujimoto A, Barkmeier WW, Takamizawa T, Latta MA, Miyazaki M. Depth of cure, flexural properties and volumetric shrinkage of low and high viscosity bulk-fill giomers and resin composites. Dent Mater J 2017; 36(2):205-13.

Kumagai RY, Zeidan LC, Rodrigues JA, Reis AF, Roulet JFJ. Bond Strenght of a Flowable Bulk-fill Resin Composite in Class II MOD cavities. Adhes Dent 2015; 17(5):427-32.

Palin WM, Senyilmaz DP, Marquis PM, Shortall AC. Cure width potential for MOD resin composite molar restorations. Dent Mater 2008; 24(8):1083-94.

Moszner N, Fischer UK, Ganster B, Liska R, Rheinberger V. Benzoyl germanium derivates as novel visible light photoinitiators for dental materials. Dent Mater 2008; 24(7):901-7.

Li X, Pongprueksa P, Van Meerbeek B, De Munck J. Curing profile of bulk-fill resin-based composites. J Dent 2015; 43(6):664-72.

Abouelleil H, Pradelle N, Villat C, Attik N, Colon P, Grosgogeat B. Comparison of mechanical properties of a new fiber reinforced composite and bulk filling composites. Rest Dent End 2015; 40(4):262-70.

Leprince JG, Palin WM, Hadis MA, Devaux J, Leloup G. Progress in dimethacrylate-based dental composite technology and curing efficiency. Dent Mater 2013; 29(2):139-56.

Le Bell AM, Tanner J, Lassila LV, Kangasniemi I, Vallittu PK. Depth of light-initiated polymerization of glass fiber-reinforced composite in a simulated root canal. Int J Prosthodont 2003; 16(4):403-8.

Miyagawa Y, Powers JM, O’Brien WJ. Optical properties of direct restorative materials. J Dent Res 1981; 60:890-4.

Alkhudhairy FI. The effect of curing intensity on mechanical properties of different bulk-fill composite resins. Clin Cosmet Investig Dent 2017; 9:1-67.

Zorzin J, Maier E, Harre S, Fey T, Belli R, Lohbauer U, et al. Bulk-fill resin composites: polymerization properties and extended light curing. Dent Mater 2015; 31:293-301.

Czasch P, Ilie N. In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig 2013; 17(1):227-35.

Alqahtani MQ, Michaud PL, Sullivan B, Labrie D, Alshaafi MM, Price RB. Effect of high irradiance on depth of cure of a conventional and a bulk fill resin-based composite. Oper Dent 2015; 40(5).

Al-Ahdal K, Ilie N, Silikas N, Watts DC. Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth. Dent Mater 2015; 31(10):1207-13.

Kemaloglu H, Kaval ME, Turkun M, Kurt SM. Effect of novel restoration techniques on the fracture resistance of teeth treated endodontically: an in vitro study. Dent Mater 2015; 34(5):618-22.

Algamaiah H, Sampaio CS, Rigo LC, Janal MN, Giannini M, Bonfante EA, et al. Microcomputed tomography evaluation of volumetric shrinkage of bulk-fill composites in class II cavities. J Esthet Restor Dent 2016; 29(2):118-27.

Jung JH, Park SH. Comparison of polymerization shrinkage, physical properties, and marginal adaptation of flowable and restorative bulk-fill resin-based composites. Oper Dent 2017; 42(4):375-86.

Moharam LM, El-Hoshy AZ, Abou-Elenein K. The effect of different insertion techniques on the depth of cure and vickers surface micro-hardness of two bulk-fill resin composite materials. J Clin Exp Dent 2017; 9(2):266-71.

Rodriguez A, Yaman P, Dennison J, Garcia D. Effect of light-curing exposure time, shade, and thickness on the depth of cure of bulk fill composites. Oper Dent 2017; 42(3):505-13.

Publicado
2018-08-15
Como Citar
Balensiefer Vicenzi, C., & Benetti, P. (2018). Características mecânicas e ópticas de resinas bulk-fill: revisão de literatura. Revista Da Faculdade De Odontologia - UPF, 23(1). https://doi.org/10.5335/rfo.v23i1.7675
Seção
Artigos